Onkyo TX-SA705 First Time Setup—Continued, Automatic Speaker Setup Audyssey MultEQ XT

First Time Setup—Continued

Automatic Speaker Setup

(Audyssey MultEQ XT)

With the supplied speaker setup microphone, the Audyssey MultEQ XT function can measure the number of speakers connected, their sizes, crossover frequencies, and the distance from each speaker to the listening posi- tion and calculate the optimal speaker settings for your listening environment automatically.

Before using this function, connect and position all of your speakers.

Measurement Positions

To create a listening environment in which several peo- ple can enjoy your home theater simultaneously, Audys- sey MultEQ XT takes measurements at up to eight positions within the listening area.

■1st measurement point

This is the center position of your listening area, or the listening position if there’s only one listener.

■2nd8th measurement positions

These are the other listening positions (i.e., the places where the other listeners will sit). You can measure up to eight positions.

The following examples show some typical home theater seating arrangements. Choose the one that best matches yours, and position the microphone accordingly when prompted.

TV TV TV

TV TV TV

TV TV TV

Using Audyssey MultEQ XT

1

2, 11

3-9

Notes:

•If any of your speakers is 4 ohms, change the Speaker Impedance setting before running the automatic speaker setup (see page 46).

•If the AV receiver/AV amplifier is muted, it will be unmuted automatically when the automatic speaker setup starts.

•Automatic speaker setup cannot be performed while a pair of headphones is connected.

•It takes about 15 minutes to complete the auto- matic speaker setup for three positions. Total measurement time varies depending on the num- ber of positions and speakers.

•Do not disconnect the speaker setup microphone during the automatic speaker setup, unless you want to cancel the setup.

•Do not connect or disconnect any speakers during the automatic speaker setup.

: listening area 1 Turn on the AV receiver/AV

-	: listening position	amplifier and the connected TV.
		On the TV, select the input to which the
		AV receiver/AV amplifier is connected.

54