Onkyo TX-SA705 First Time Setup—Continued, Save, Review SP Config, Review SP Distance, Cancel

First Time Setup—Continued

7After the 3rd to the 7th measure- ment, the following screen

appears.

Auto Speaker Setup AUDYSSEY

ENTER

Please select “Next” , when measuring next position, and select “finish” , when ending.

Next

finish (Calculate)

ENTER

Use the Up and Down []/[ ] buttons to select an option, and then press [ENTER].

Next: Select this if you want to mea- sure another listening posi- tion.

After the 8th measurement has been taken, the procedure automatically proceeds to step 8.

finish (Calculate): Select this if you don’t want to measure any more listening positions and are ready to calculate the results, then go to step 8.

8When the measurements are complete, the following screen appears.

Auto Speaker Setup AUDYSSEY

Calculating...

9When the calculations are com- plete, the following screen appears.

Auto Speaker Setup AUDYSSEY

Save

Review SP Config

Review SP Distance

Review SP Level

Cancel

	Use the Up and Down [ ]/[ ]
	buttons to select an option, and
ENTER	then press [ENTER].
	The options are:
	Save:
	Save the calculated settings and exit
	the automatic speaker setup.
ENTER	Review SP Config:
	Review the speaker configuration
	settings (see “Reviewing the
	Results” on page 58).
	Review SP Distance:
	Review the speaker distance set-
	tings (see “Reviewing the Results”
	on page 58).
	Review SP Level:
	Review the speaker level settings (see
	“Reviewing the Results” on page 58).
	Cancel:
	Cancel the automatic speaker setup.

10	If you selected “Save,” the results are
	saved, and the following screen
	appears.
		Auto Speaker Setup	AUDYSSEY
		Saving...
11	Disconnect the speaker setup
	microphone.
		Auto Speaker Setup	AUDYSSEY
		Please unplug microphone.

Notes:

•When the automatic speaker setup is complete, the Equalizer Settings (page 82) will be set to “Audyssey.”

•You can cancel the automatic speaker setup at any point in this procedure simply by disconnecting the setup microphone.

56