Onkyo TX-SA705 Advanced Setup—Continued, THX Audio Setup, Notes, Use the Up and Down

Advanced Setup—Continued

6

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select a frequency, and then use the Left and Right []/[ ] buttons to adjust the level at that frequency.

The volume at each frequency can be adjusted from –6 to +6 dB in 1 dB steps.

Tip: Low frequencies (e.g., 160 Hz) affect bass sounds; high frequencies (e.g., 6300 Hz) affect treble sounds.

THX Audio Setup

These settings are not set automatically by the Auto- matic Speaker Setup function (see page 54).

With the Surr Back Sp Spacing setting, you can specify the distance between your surround back speakers.

1Press the [RECEIVER] REMOTE MODE button, followed by the

[SETUP] button.

The main menu appears onscreen.

7	Use the Up and Down [ ]/[	]
	buttons to select “Channel,” and
	then use the Left and Right [	]/

ENTER	[ ] buttons to select another
	speaker.

2 Use the Up and Down []/[ ]

Repeat step 6 and 7 for each speaker.

ENTER

8Press the [SETUP] button.

The setup menu closes.

ENTER

ENTER

buttons to select “2. Speaker Setup,” and then press [ENTER].

The Speaker Setup menu appears.

2. Speaker Setup

1. Speaker Settings

2. Speaker Config

3.Speaker Distance

4.Level Calibration

5.Equalizer Settings

6.THX Audio Setup

Notes:

•When the listening mode is set to Direct, Pure Audio or THX, no effect will be produced.

•Depending on the input source or listening mode, the Equalizer settings may not produce the desired effect.

•This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

3	Use the Up and Down [ ]/[ ]
	buttons to select “6. THX Audio
	Setup,” and then press [ENTER].
	The THX Audio Setup screen appears.
	ENTER
	2–6. THX Audio Setup
	Surr Back Sp Spacing	<1ft
	ENTER

83