Onkyo TX-SA705 First Time Setup—Continued, HDMI Monitor Setup, The Monitor Out menu appears

First Time Setup—Continued

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “1. Input/Out- put Assign,” and then press [ENTER].

The Input/Output Assign menu appears.

1.Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Input

1

2, 3

2-4

1, 5

HDMI Monitor Setup

If you connect your TV to the COMPONENT VIDEO OUT, set the HDMI Monitor setting to No so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output by the COMPONENT VIDEO OUT.

Composite video, S-Video	Component video
IN
OUT
Composite video, S-Video	Component video

If you connect your TV to the HDMI OUT, set the HDMI Monitor setting to Yes so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted* and output by the HDMI OUT. The onscreen setup menus are dis- played on the HDMI OUT only.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

3	Use the Up and Down [		]/[	]
	buttons to select “1. Monitor
	Out,” and then press [ENTER].
	The Monitor Out menu appears.
	ENTER
	1–1. Monitor Out
	HDMI Monitor	No
	ENTER
4	Use the Left and Right [		]/[	]
	buttons to select:

No: Select this if your TV is con- nected to the MONITOR OUT or COMPONENT VIDEO OUT.

Yes: Select this if your TV is con- nected to the HDMI OUT.

5Press the [SETUP] button.

The Setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

47