Onkyo TX-SA705 Advanced Setup—Continued, OSD Setup, Use the Up and Down, and then press ENTER

Advanced Setup—Continued

OSD Setup

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select

“6. Miscellaneous,” and then press [ENTER].

ENTER

The Miscellaneous menu appears.

6. Miscellaneous

1.Volume Setup

2.OSD Setup

ENTER

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. OSD Setup,”
	and then press [ENTER].
ENTER	The OSD Setup menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Monitor Type	4 : 3
	Display Position	Bottom
	TV Format	Auto
ENTER

4

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right []/ [ ] buttons to set them.

These settings determine how the oper- ation details are displayed.

Immediate Display

This preference determines whether operation details are displayed onscreen when an AV receiver/AV amplifier function is adjusted.

On: Displayed (default).

Off: Not displayed.

Even when On is selected, operation details may not be output if the input source is connected to a COMPO- NENT VIDEO IN or HDMI IN.

For optimal video performance, THX recommends that Immediate Display be turned off.

Monitor Type

With this preference, you can specify the aspect ratio of your TV so that the operation details are displayed prop- erly.

4 : 3: Select if your TV is 4 : 3 (default).

16 : 9: Select if your TV is 16 : 9.

Display Position

This preference determines where on the screen operation details are dis- played.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

TV Format (not North American models)

See “TV Format Setup (not North American models)” on page 52.

5When you’ve finished, press the [SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

93