Onkyo TX-SA705 Controlling Other Components—Continued, Resetting REMOTE MODE Buttons

Controlling Other Components—Continued

Remote Control Codes for Onkyo Components Connected via

Onkyo components that are connected via are con- trolled by pointing the remote controller at the AV receiver/AV amplifier, not the component. This allows you to control components that are out of view, in a rack, for example.

1Make sure the Onkyo component is con-

nected with an cable and an analog audio cable (RCA).

See page 43 for details.

2Enter the appropriate remote control code for the REMOTE MODE button.

•[DVD] REMOTE MODE button 5002: Onkyo DVD player with

•[CD] REMOTE MODE button 6002: Onkyo CD player with

•[MD] REMOTE MODE button 6008: Onkyo MD recorder with

•[CDR] REMOTE MODE button 6006: Onkyo CD recorder with

•[DOCK] REMOTE MODE button

6004: Onkyo RI DOCK DS-A1 with

See the previous page for how to enter remote control codes.

3Press the REMOTE MODE button, point the remote controller at the AV receiver/ AV amplifier, and operate the component.

If you want to control an Onkyo component by pointing the remote controller directly at it, or you want to control

an Onkyo component that’s not connected via , use the following remote control codes:

• [DVD] REMOTE MODE button

5001: Onkyo DVD player without (default)

• [CD] REMOTE MODE button

6001: Onkyo CD player without (default)

• [MD] REMOTE MODE button 6007: Onkyo MD recorder without

• [CDR] REMOTE MODE button 6005: Onkyo CD recorder without

• [DOCK] REMOTE MODE button

6003: Onkyo RI DOCK DS-A2 without (default)

Note:

If you connect an -capable Onkyo MiniDisc or CD recorder to the TAPE IN/OUT jacks, for remote opera- tion to work properly, you must set the Input Display to MD or CDR, respectively (see page 50).

Resetting REMOTE MODE Buttons

You can reset a REMOTE MODE button to its default remote control code.

1While holding down the REMOTE MODE button that you want to

reset, press the TV [ ] button.

The Remote indicator flashes three times.

2Press the REMOTE MODE button again.

The Remote indicator flashes twice, indicating that the button has been reset.

The [DVD] and [CD] REMOTE MODE buttons are preprogrammed with remote control codes for control- ling Onkyo DVD players and CD play- ers respectively. When these buttons are reset, the preprogrammed code is restored.

Resetting the Remote Controller

You can reset the remote controller to its default settings.

1While holding down the

[RECEIVER] REMOTE MODE but- ton, press the [STANDBY] button.

The Remote indicator flashes five times.

2Press the [RECEIVER] REMOTE MODE button again.

The Remote indicator flashes twice, indicating that the remote controller has been reset.

105