Onkyo TX-SA705 First Time Setup—Continued, AM Frequency Step Setup on some models

First Time Setup—Continued

AM Frequency Step Setup (on some models)

You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1Press the [RECEIVER] button, followed by the [SETUP] button.

The main menu appears onscreen.

Note:

•This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “7. Hardware Setup,” and then press [ENTER].

The Hardware Setup menu appears.

7.Hardware Setup

1.Remote Control

2.Zone2

3.Tuner

4.Analog Multich

5.HDMI

3	Use the Up and Down [ ]/[ ]
	buttons to select “3. Tuner,” and
	then press [ENTER].
ENTER	The Tuner menu appears.
	7–3. Tuner
	AM Frequency Step	9 kHz
ENTER

4	Use the Left and Right [ ]/[ ]
	buttons to select:

10 kHz: Select if 10 kHz steps are used in your area.

9 kHz: Select if 9 kHz steps are used in your area.

5Press the [SETUP] button.

The Setup menu closes.

53