Onkyo TX-SA705 instruction manual Advanced Setup—Continued, Changing the Remote Controller’s ID

Advanced Setup—Continued

Changing the Remote Controller’s ID

If several Onkyo components are used in the same room, the remote controller’s control codes may overlap with those of another component. To differentiate the remote controller’s control codes, you can change its ID to another number.

Note:

If you change the remote controller’s ID, be sure to set the same ID on both the remote controller and AV receiver/AV amplifier (see “Changing the AV Receiver/ AV Amplifier’s ID” on page 94). The default ID for both is 1.

INPUT

Number

buttons

RECEIVER

1Hold down the [RECEIVER] and the TV [INPUT] buttons at the same time.

The Remote indicator flashes four times.

2Use the number buttons to enter ID 1, 2, or 3.

The Remote indicator flashes twice.

98