Onkyo TX-SA705 Advanced Setup—Continued, Correcting Sound and Picture Sync, Use the Up and Down

Advanced Setup—Continued

Correcting Sound and Picture Sync

When using progressive scanning on your DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals. You can set it from 0 to 250 milliseconds (msec) in 5 millisecond steps.

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

4

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “2. A/V Sync,” and then press [ENTER].

The A/V Sync menu appears.

4–2. A/V Sync

	DVD
A/V Sync		20msec
(HDMI Lip Sync		0msec)

Press Enter to see picture.

2	Use the Up and Down [ ]/[ ]
	buttons to select “4. Source
	Setup,” and then press [ENTER].
	The Source Setup menu appears.
	ENTER
	4.	Source Setup
		DVD
	1.	IntelliVolume
	2.	A/V Sync
	3.	Name Edit
	ENTER

If HDMI Lip Sync is enabled (see page 95), and your TV or display sup- ports HDMI Lip Sync, the HDMI Lip Sync delay time is displayed under- neath in parentheses.

5Press [ENTER] to view the TV picture, and use the Left and

ENTER	Right [ ]/[ ] buttons to adjust
	the delay from 0 to 250 millisec-
	onds in 5 millisecond steps.

3Use the INPUT SELECTOR but-

tons on the remote controller to select the input source that you want to correct.

Notes:

•This setting is not available when the Pure Audio lis- tening mode is used, or the Direct listening mode is used with an analog input signal.

•This procedure can also be performed on the remote controller by using INPUT SELECTOR buttons. Press and hold, for more than 5 seconds, the INPUT

SELECTOR button for the input source that you want to correct. Use the Left and Right [ ]/[ ] buttons to adjust the delay.

89