Onkyo TX-SA705 2, 4, Advanced Setup—Continued, Source Setup, IntelliVolume, Use the Up and Down

Advanced Setup—Continued

5When you’ve finished, press the [SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “4. Source Setup,” and then press [ENTER].

The Source Setup menu appears.

4. Source Setup

DVD

1.IntelliVolume

2.A/V Sync

3.Name Edit

Source Setup

3
2, 4	1
	2, 4, 5
1, 6
IntelliVolume

You can set the input level for each input source. This is useful if some of your AV components are louder or qui- eter than others. IntelliVolume does not affect Zone 2.

While this menu is shown onscreen, you can select each input source and set the levels while listening to and comparing them.

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

3Use the INPUT SELECTOR but-

tons on the remote controller to select the input source that you want to set.

4	Use the Up and Down [ ]/[ ]
	buttons to select
	“1. IntelliVolume,” and then press
	[ENTER].
	ENTER
	The IntelliVolume menu appears.
	4–1. IntelliVolume
	DVD
	IntelliVolume	0dB
	ENTER

5If a component is too loud com- pared to your other components,

use the Left [ ] button to adjust the level. If it’s too quiet, use the Right [ ] button.

• The level can be set from –12 dB to +12 dB in 1 dB steps.

6When you’re finished, press the [SETUP] button.

The setup menu closes.

88