Onkyo TX-SA705 Advanced Setup—Continued, HDMI Setup, HDMI Audio Out, Lip Sync, xvYCC, Notes

Advanced Setup—Continued

HDMI Setup

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

2 Use the Up and Down []/[ ]

HDMI Audio Out

This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. You may want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio from a component that’s connected to an HDMI IN, through your TV’s speakers. Normally, this should be set to Off.

Off: HDMI audio is not output (default).

On: HDMI audio is output.

Notes:

• If On is selected and the signal can be output by the

TV, the AV receiver/AV amplifier will output no

ENTER

ENTER

buttons to select “7. Hardware Setup,” and then press [ENTER].

The Hardware Setup menu appears.

7. Hardware Setup

1. Remote Control

2. Zone2

3.Tuner

4.Analog Multich

5.HDMI

	sound through its speakers.
•	When TV Control is enabled, this setting is set to
	Auto.
•	With some TVs and input signals, no sound may be
	output even when this setting is set to On.

Lip Sync

The AV receiver/AV amplifier can be set to automati- cally correct any delay between the video and the audio, based on the data from the connected monitor. Disable: HDMI lip sync disabled.

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “5. HDMI,” and then press [ENTER].

The HDMI menu appears.

7–5. HDMI

HDMI Audio Out		Off
Lip Sync		Disable
xvYCC		Disable
Control		Disable
Power Control	- - -
TV Control	- - -

Enable: HDMI lip sync enabled.

Notes:

•This function works only if your HDMI-compatible TV supports HDMI Lip Sync.

•You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (see page 89).

xvYCC

4	Use the Up and Down [	]/[	]
	buttons to select the settings and
	use the Left and Right [	]/[	]
ENTER	buttons to select them.

The HDMI settings are explained below.

ENTER

If you set the xvYCC color function to Enable while a source and monitor that both support the xvYCC color standard are connected to HDMI, the color quality will be improved.

Disable: xvYCC color disabled.

Enable: xvYCC color enabled.

Notes:

•If the color is unnatural when xvYCC color is set to Enable, change the setting to Disable.

•Refer to the connected component’s instruction man- ual for details.

95