Onkyo TX-SA705 instruction manual Advanced Setup—Continued, Volume Setup/OSD Setup

Advanced Setup—Continued

Volume Setup/OSD Setup

This section explains the items on the Miscellaneous menu.

Volume Setup

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

2 Use the Up and Down []/[ ]

buttons to select

“6. Miscellaneous,” and then press [ENTER].

ENTER

The Miscellaneous menu appears.

6. Miscellaneous

1.Volume Setup

2.OSD Setup

ENTER

Muting Level

This setting determines how much the output is muted when the Muting func- tion is used (see page 61). It can be set to – f dB (fully muted) or from –50 dB to –10 dB in 10 dB steps.

Maximum Volume

With this setting, you can limit the maximum volume.

When the Volume Display setting is set to Absolute, the Maximum Volume range is Off, 50 to 99.

When it’s set to Relative, the range is Off, –32 dB to +17 dB. To disable this setting, select Off.

Power On Volume

With this preference, you can specify the volume setting to be used each time the AV receiver/AV amplifier is turned on.

When the Volume Display preference is set to Absolute, the range is Last, Min, 1 to 99 or Max.

When it’s set to Relative, the range is Last, – f dB, –81 dB to +18 dB. To use the same volume level that was used when the AV receiver/AV amplifier was turned off, select Last.

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “1. Volume Setup,” and then press [ENTER].

The Volume Setup menu appears.

6–1. Volume Setup

Volume Display	Relative
Muting Level	-∞dB
Maximum Volume	Off
Power On Volume	Last
Headphone Level	0dB

The “Power On Volume” cannot be set higher than the “Maximum Volume” setting.

Headphone Level

With this preference, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speak- ers and your headphones. The head- phones level can be set from –12 dB to +12 dB.

5When you’ve finished, press the [SETUP] button.

4

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select the settings, and use the Left and Right []/ [ ] buttons to set them.

Volume Display

With this setting, you can choose how the volume level is displayed. Absolute: Display range is Min, 1

through 99, Max. Relative: Display range is –fdB,

–81 dB through +18 dB. The absolute value 82 is equivalent to the relative value 0 dB.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

92