Windows 98
Windows 98 Setup
After installing the EtherFast hardware in your comput- er, follow these instructions for installing the network driver. The installation procedure for the network driver will vary slightly depending on the version of Windows 98 you are using and your current system configuration. If at any time during the installation you encounter problems, consult the Troubleshooting section on page 55 of this guide.
To install the network driver:
1.Start up your computer and Windows 98.
2.Windows 98 will automatically detect the presence of the PCI Ethernet Card hardware in your computer.
3.While the Update Device Driver Wizard window is visible, put the EtherFast Card program disk 1 into drive A and click on Next.
4.The following window will appear, select "Search for the best driver for your device (Recommended).” Click on Next.
11
