Linksys FENSK05 manual Cd c\diag diag

NetWare

3.When you type install, a new directory called DIAG will be created on your C: drive, and the DIAG setup and diagnostic program will be copied to it.

4.When you're ready to run DIAG, just type the follow- ing commands from the DOS command prompt (C:>) and press Enter after each one:

c:

cd c:\diag diag

After typing the diag command, the EtherFast Diagnostics program will appear. The program will allow you to install your Novell network workstation drivers.

5.When the program window appears, press Alt-A(the Alt and A keys together) to select the AutoInstall option from the menu. (You can also use your mouse to click on the AutoInstall button if you prefer).

6.Next, using the arrow keys on your keyboard, high- light the DOS ODI Workstation option and press Enter.

7.Enter the directory in the Destination Directory box where you want your Novell network drivers to be installed, or you can use the default directory of c:\nwclient.

8.Next, press Alt-Sto choose the Server Type that you are using. When the list of servers appears, use the arrow keys on your keyboard to scroll through the list. Highlight the type of server that your workstation will be using and press Enter to select it.

9.When you're ready to install the software for your workstation, press Alt-Ito begin the setup. DIAG will begin distributing the appropriate network driver files to your computer.

36