Linksys FENSK05 manual Novell Client32 Setup for Windows 95

NetWare

Novell Client32 Setup for Windows 95 and 98

Client32 drivers are required for connecting to a 4.x or 5.0 server while in Windows 95 only.

If you are using Windows 98, you must obtain the latest version of Client32. The installation is very similar to that of Windows 95 OSR2. Follow the OSR2 (version

B)instructions below. When asked for the location of the drivers, specify a:\client32 on the EtherFast 10/100 LAN Card program diskette.

Before you begin, obtain the Client32 disks or CD- ROM from Novell. You may be able to download a copy of the disk(s) from Novell's BBS or web site.

Follow the directions below to install and/or configure your Client32 drivers for use with the card.

1.If Novell's Client32 drivers are already installed on your computer, do the following to remove any network adapter settings that may conflict with the EtherFast card: Click on Start, Settings, Control Panel, and dou- ble-click on the Network icon. If you see any network adapters listed in the box, remove them. Finally, remove all floppy disks from your computer and reboot.

2.If you have not installed Novell's Client32 drivers onto your computer, run the Client32 SETUP.EXE pro- gram. When the program appears, click Yes, followed by Start to begin the installation. When Setup is fin- ished copying files to your system, reboot.

3.After Windows is up and running, remove all floppy disks from your computer. Insert the EtherFast card into your PC.

38