Appendix
LEDs
LNE100TX EtherFast 10/100 Network Card
LINK The card has been successfully connected to a live port on a hub or switch
ACT Denotes the card’s activity. Network packets are being transmitted or received when this LED is flickering
100When ON, the card is operting at 100Mbps When OFF, the card is operating at 10Mbps
FDX When ON, the card is operating at a maxi mum throughput of 200 or 20Mbps; When OFF, the card is operating in half duplex at a speed of either 100 or 10Mbps
EFAH05W EtherFast 10/100 Auto-Sensing 5-Port Workgroup Hub
POWER Indicates that the hub is receiving power.
100/10COL Indicates if collisions are being encountered at 100Mbps and/or 10Mbps.
100ON if a given port is operating at 100Mbps; off if the port is running at 10Mbps.
LINK/ACT ON or flickering if a given port is sending or receiving data; off if the port is not con- nected to a node.
SW ON if uplink port is in 100Mbps/100 meter Distance Extender mode. All connections on the hub must be running at 100Mbps.
66
