Linksys FENSK05 manual Windows NT 4.0 Setup

Windows NT

Windows NT 4.0 Setup

The instructions that follow explain how to set up an NT 4.0 server/workstation.

You should have your original Windows NT CD-ROM handy during the installation, as you might be asked to supply it. Always contact your network administrator or consult your NT documentation if you have questions.

To install the network driver for an NT 4.0 Server or Workstation:

1.Start up your computer and Windows NT 4.0. Enter your username and password if asked to do so.

2.Click on Start, Settings, Control Panel, and then double-click on the Network icon.

3.If you have not installed Windows NT networking on your computer before, a message appears that reads: Windows NT Networking is not installed. Do you want to install it now?

•If you see this message, click on Yes to install NT net- working along with the EtherFast Card's network driver, and continue with step 1 on the next page.

•If you don't see this message, NT networking is already installed. Continue with step 1 on page 30. Installing NT Networking and the EtherFast Network Driver

26