Onkyo TX-SA705 Zone 2—Continued, Adjusting the Volume for Zone, To Mute Zone, Notes

Zone 2—Continued

Adjusting the Volume for Zone 2

ZONE 2 LEVEL ,

Remote

controller

AV receiver/ AV amplifier

On the remote controller, press the [ZONE 2] button, and then use the [LEVEL–] and [LEVEL+] buttons.

On the AV receiver/AV amplifier, use the ZONE 2 LEVEL []/[ ] buttons.

If your Zone 2 speakers are connected to a receiver or integrated amp in Zone 2, use its volume control to adjust the volume.

To Mute Zone 2:

Press the remote controller’s [ZONE 2] button, followed by the [MUTING] button. To unmute Zone 2, press the remote controller’s [ZONE 2] button again, followed by the [MUTING] button, or adjust the volume for Zone 2.

Notes:

•Only analog input sources are output by the ZONE 2 LINE OUT and ZONE 2 SPEAKERS terminals. Dig- ital input sources are not output. If no sound is heard when an input source is selected, check if it’s con- nected to an analog input.

•While Zone 2 is being used, listening modes that need surround back speakers (i.e., Dolby Digital EX, DTS- ES, and THX Select2 Cinema) are unavailable.

•While Zone 2 is on, functions will not work.

•You can’t select different radio stations for Zone 2 and the main room. For example, if you have an FM sta- tion for the main room, that station will also be used in Zone 2.

102