Onkyo TX-SA705 Zone 2—Continued, Setting the Powered Zone, Use the Up and Down, then press ENTER

Zone 2—Continued

Setting the Powered Zone 2

To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS termi- nals so that they produce sound when Zone 2 is used.

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

5Press the [SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “7. Hardware Setup,” and then press [ENTER].

The Hardware Setup menu appears.

7.Hardware Setup

1.Remote Control

2.Zone2

3.Tuner

4.Analog Multich

5.HDMI

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. Zone2,” and
	then press [ENTER].
	The Zone2 menu appears.
	ENTER
	7–2. Zone2
	Powered Zone2	Not Act
	ENTER

4	Use the Left and Right [ ]/[ ]
	buttons to select:

Not Act: ZONE 2 SPEAKERS termi- nals deactivated.

Act: ZONE 2 SPEAKERS termi- nals activated.

When Zone 2 is activated and turned on (see below), the speakers connected to the ZONE 2 SPEAKERS terminals output sound, but the speakers con- nected to the SURR BACK SPEAK- ERS terminals do not (when Zone 2 is activated but not used, the surround back speakers work as normal).

100