Onkyo TX-SA705 Advanced Setup—Continued, Multichannel DVD Input Settings, Use the Up and Down

Models: TX-SA705

1 116
Download 116 pages 61.12 Kb
Page 84
Image 84
1–4 ft (0.3–1.2 m): Select this if your

Advanced Setup—Continued

4

Use the Left and Right [buttons to select “4. Analog Mul-]/[tich,” and then press [ENTER]. ]

2 Use the Up and Down [The Analog Multich menu appears.]/[ ]

buttons to specify the distance between your surround back speakers:

< 1 ft (< 0.3 m) (Default): Select this if

your surround back speakers are

between 0 and 1 foot (0–30 cm) apart.

1–4 ft (0.3–1.2 m): Select this if your

surround back speakers are between 1

and 4 feet (0.3–1.2 m) apart.

>4 ft (>1.2 m): Select this if your sur-

round back speakers are more than 4

ENTER

ENTER

buttons to select “7. Hardware Setup,” and then press [ENTER].

The Hardware Setup menu appears.

7. Hardware Setup

1. Remote Control

2. Zone2

3.Tuner

4.Analog Multich

5.HDMI

5

feet (1.2 m) apart.

Note:

This setting is only available if the Surr Back Ch setting in the Speaker Config- uration is set to 2ch (page 78).

Press the [SETUP] button.

The setup menu closes.

3

Use the Up and Down [ ]/[ ]

 

buttons to select “4. Analog Mul-

 

tich,” and then press [ENTER].

 

The Analog Multich menu appears.

 

ENTER

 

 

7–4. Analog Multich

 

 

Subwoofer Input Sensitivity

0dB

 

ENTER

 

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP], [ENTER], and arrow buttons.

Multichannel DVD Input Settings

Subwoofer Input Sensitivity

Some DVD players output the LFE channel from their subwoofer output at 15 dB higher than normal. You can change the subwoofer sensitivity to match your DVD player. Note that this setting only affects signals con- nected to the SUBWOOFER input jack of the multichan- nel DVD input.

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

4

Use the Left and Right [ ]/[ ]

 

buttons to select a value.

You can select 0 dB, 5 dB, 10 dB, or 15 dB.

If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting.

5Press the [SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

84

Page 84
Image 84
Onkyo TX-SA705 Advanced Setup—Continued, Multichannel DVD Input Settings, Subwoofer Input Sensitivity, Use the Up and Down