Onkyo TX-SA705 First Time Setup—Continued, Video Input Setup, HDMI Input Setup, Notes

First Time Setup—Continued

Video Input Setup

HDMI Input Setup

If you connect a video component to HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you must assign HDMI IN 1 to the DVD input selector.

If you’ve connected your TV to the AV receiver/AV amplifier with an HDMI cable, you can set the AV receiver/AV amplifier so that composite video, S-Video, and component video sources are upconverted* and out-

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “2. HDMI Input,” and then press [ENTER].

The HDMI Input menu appears.

1–2. HDMI Input

DVD		- - -
VCR/DVR	- - -
CBL/SAT	- - -
GAME/TV	- - -
AUX	- - -

put by the HDMI OUT. You can set this for each input selector by selecting the “- - -” option.

Composite video, S-Video,
component video	HDMI
IN
OUT
Composite video, S-Video,	HDMI
component video

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

4

ENTER

ENTER

Use the Up and Down [ ]/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:

IN 1: Select if the video component is connected to HDMI IN 1.

IN 2: Select if the video component is connected to HDMI IN 2.

IN 3: Select if the video component is connected to HDMI IN 3.

-- -:Output composite video, S-Video, and component video sources from the HDMI OUT. The video output signal from the HDMI OUT is the one configured in “Compo- nent Video Setup” (see page 49).

5Press the [SETUP] button.

The Setup menu closes.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “1. Input/Out- put Assign,” and then press [ENTER].

The Input/Output Assign menu appears.

1.Input/Output Assign

1.Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Input

Notes:

•Each HDMI IN cannot be assigned to more than one input selector.

•For composite video, S-Video, and component video upconversion for the HDMI OUT, the HDMI Monitor setting must be set to Yes (see page 47), and the HDMI Input setting must be set to “- - -”. See page 27 for more information on video signal flow and upconver- sion.

•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 51.

•This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

48