Onkyo TX-SA705 instruction manual First Time Setup—Continued, Digital Input Setup, Examples, Notes

First Time Setup—Continued

Digital Input Setup

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selector. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed.

Here are the default assignments.

Input selector	Default assignment
DVD	COAX 1
VCR/DVR	COAX 2
CBL/SAT	COAX 3
GAME/TV	OPT 1
AUX	FRONT
TAPE	- - -
TUNER	- - -
(TX-SA705 only)
CD	OPT 2
PHONO	- - -

When HDMI IN 1, 2 or 3 is assigned to an input selector in the “HDMI Input Setup” on page 48, the input selec- tor assignment on this page is automatically set to HDMI 1, HDMI 2 or HDMI 3.

1Press the [RECEIVER] button fol-

lowed by the [SETUP] button.

The main menu appears onscreen.

2	Use the Up and Down [ ]/[ ]
	buttons to select “1. Input/Out-

4	Use the Up and Down [ ]/[ ]
	buttons to select an input selec-
	tor, and use the Left and Right
	[ ]/[ ] buttons to select
ENTER	COAX 1, COAX 2, COAX 3,
	OPT 1, OPT 2, or - - - (analog).
	• An input selector that has been
	assigned to IN 1, IN 2 or IN 3 in the
	“HDMI Input Setup” (see page 48)
	can be set to HDMI here.
ENTER	• AUX is used only for digital input
	from the front panel terminals. When
	HDMI IN 1, 2 or 3 is assigned to
	AUX in the “HDMI Input Setup” on
	page 48, IN 1, IN 2 or IN 3 can be
	selected.

Examples:

If you connect your DVD player to the OPTICAL IN 1 jack, set “DVD” to “OPT 1.”

If you want to listen to audio from the component connected to the OPTICAL IN 2 jack when the VCR/DVR input selector is selected, set “VCR/DVR” to “OPT 2.”

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the CBL/SAT input selector is selected, set “CBL/ SAT” to “COAX 1.”

For input selectors that you don’t want to assign a digital input jack, set to

“- - - (analog).”

5Press the [SETUP] button.

The Setup menu closes.

ENTER

ENTER

put Assign,” and then press [ENTER].

The Input/Output Assign menu appears.

1. Input/Output Assign

1. Monitor Out

2.HDMI Input

3.Component Video Input

4.Digital Input

Notes:

• This procedure can also be performed on the AV

receiver/AV amplifier by using its [SETUP] button,

arrow buttons, and [ENTER] button.

• This procedure can also be performed on the AV

receiver/AV amplifier by using its input selector but-

ton and [DIGITAL INPUT] button. First Press the

input selector button for the source that you want to

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “4. Digital Input,” and then press [ENTER].

The Digital Input menu appears.

1–4. Digital Input

DVD		COAX 1
VCR/DVR		COAX 2
CBL/SAT		COAX 3
GAME/TV		OPT 1
AUX		FRONT
TAPE	- - -
TUNER	- - -
CD		OPT 2
PHONO	- - -

assign. Press the [DIGITAL INPUT] button repeat-

edly to select COAX1, COAX2, COAX3, OPT1,

OPT2, or - - - (analog).

51