Cisco Systems OL-16066-01 appendix Http Page-Setup Tab, Http and Https on Cisco IOS Routers, 111

Appendix K Router Platform User Interface Reference

HTTP Policy Page

HTTP Page—Setup Tab

Use the Setup tab of the HTTP page to enable HTTP and HTTP over Secure Socket Layer (HTTP over SSL or HTTPS) on the router. You can optionally limit access to these protocols to the addresses defined in an access control list.

Note As a general rule, Cisco IOS routers that have been discovered by Security Manager already have HTTPS enabled because Security Manager uses SSL as the default protocol for communicating with them. See Setting Up SSL on Cisco IOS Routers, page 5-6.

	Navigation Path
	Go to the HTTP Policy Page, page K-110, then click the Setup tab.
	Related Topics
	• HTTP Page—AAA Tab, page K-112
	• HTTP and HTTPS on Cisco IOS Routers, page 15-83
	Field Reference
Table K-49	HTTP Page—Setup Tab
Element		Description
Enable HTTP		When selected, an HTTP server is enabled on the router.
		When deselected, HTTP is disabled on the router. This is the default for
		devices that were not discovered.
HTTP Port		The port number to use for HTTP. Valid values are 80 or any value from 1024
		to 65535. The default is 80.

	User Guide for Cisco Security Manager 3.2
OL-16066-01		K-111