Cisco Systems OL-16066-01 appendix NTP Policy, For more information, see Defining NTP Servers, 174

Appendix K Router Platform User Interface Reference

NTP Policy Page

Table K-76	IP Pool Dialog Box (Continued)
Option 150 (IP		The IP address of the TFTP server used to provide configuration files to IP
Addresses)		phones. These configuration files define parameters required by IP phones to
		connect to Cisco CallManager.
		Enter up to eight (8) network addresses or network/host objects, or click
		Select to display an Object Selectors, page F-593.
		If the network you want is not listed, click the Create button in the selector
		to display the Network/Host Dialog Box, page F-477. From here, you can
		define a network/host object.
		Note This option is functionally similar to option 66. Either or both
		options may be used.
OK button		Saves your changes locally on the client and closes the dialog box.
		Note To save your changes to the Security Manager server so that they are
		not lost when you log out or close your client, click Save on the
		source page.

NTP Policy Page

Use the NTP page to define one or more NTP servers that the router can use for time synchronization. This includes enabling authentication, if required, and defining a global source interface for all traffic sent to these servers.

For more information, see Defining NTP Servers, page 15-125.

Navigation Path

•(Device view) Select Platform > Device Admin > Server Access > NTP from the Policy selector.

•(Policy view) Select Router Platform > Device Admin > Server Access > NTP from the Policy Type selector. Right-clickNTP to create a policy, or select an existing policy from the Shared Policy selector.

Related Topics

•NTP on Cisco IOS Routers, page 15-124

•Chapter K, “Router Platform User Interface Reference”

	User Guide for Cisco Security Manager 3.2
K-174	OL-16066-01