Cisco Systems OL-16066-01 appendix PVC Advanced Settings Dialog Box-OAM-PVC Tab, OAM-PVC tab

Appendix K Router Platform User Interface Reference

PVC Policy Page

Table K-31 PVC Advanced Settings Dialog Box—OAM Tab (Continued)

End-to-End Continuity Check settings

Enable End-to-End	When selected, OAM F5 continuity check (CC) activation and deactivation
Continuity Check	requests are sent to a device at the other end of the PVC.
	When deselected, segment CC activation and deactivation requests are
	disabled.
	Note If Configure Continuity Check is deselected in the OAM-PVC tab,
	these settings are saved in the device configuration but are not
	applied.
Activation Count	The maximum number of times that the activation request is sent before the
	receipt of an acknowledgement. Valid values range from 3 to 600. The
	default is 3.
Deactivation Count	The maximum number of times that the deactivation request is sent before
	the receipt of an acknowledgement. Valid values range from 3 to 600. The
	default is 3.
Retry Frequency	The interval between activation/deactivation retries, in seconds. The default
	is 30 seconds.

PVC Advanced Settings Dialog Box—OAM-PVC Tab

Use the OAM-PVC tab of the PVC Advanced Settings dialog box to enable loopback cells and connectivity checks (CCs) on the PVC. These functions test the connectivity of the virtual connection.

For more information, see Defining OAM Management on ATM PVCs, page 15-56.

Note Use the OAM tab to define additional settings related to the settings on this tab. See PVC Advanced Settings Dialog Box—OAM Tab, page K-70.

Navigation Path

Go to the PVC Advanced Settings Dialog Box, page K-69, then click the

OAM-PVC tab.

	User Guide for Cisco Security Manager 3.2
OL-16066-01		K-73