Cisco Systems OL-16066-01 appendix Interface Auto Name Generator Dialog Box, Dlci

Appendix K Router Platform User Interface Reference

Router Interfaces Page

Table K-10	Create Router Interface Dialog Box (Continued)
DLCI		Applies only to serial subinterfaces with Frame Relay encapsulation.
		Enter the data-link connection identifier to associate with the subinterface.
		Valid values range from 16 to 1007.
		Note Security Manager configures serial subinterfaces as point-to-point
		not multipoint.
Description		Additional information about the interface (up to 1024 characters).
Roles		The interface roles assigned to this interface. A message is displayed if no
		roles have yet been assigned.
OK button		Saves your changes locally on the client and closes the dialog box.
		Note To save your changes to the Security Manager server so that they are
		not lost when you log out or close your client, click Save on the
		source page.

Interface Auto Name Generator Dialog Box

Use the Interface Auto Name Generator dialog box to have Security Manager generate a name for the interface based on the interface type and its location in the router.

Navigation Path

Go to the Create Router Interface Dialog Box, page K-18, select Interface from the Type list, then click Select in the Name field.

Related Topics

•Generating an Interface Name, page 15-26

•Router Interfaces Page, page K-17

•Basic Interface Settings on Cisco IOS Routers, page 15-20

	User Guide for Cisco Security Manager 3.2
K-24	OL-16066-01