Appendix K Router Platform User Interface Reference

 

 

 

 

 

 

OSPF Interface Policy Page

 

Table K-109

OSPF Interface Page (Continued)

 

 

 

 

 

 

 

Key ID

 

 

 

The identification number of the authentication key used for MD5

 

 

 

 

 

 

authentication.

 

 

 

 

 

 

 

Cost

 

 

 

The cost of sending packets over the selected interface, if this value is

 

 

 

 

 

 

different from the cost as normally calculated.

 

 

 

 

 

 

 

Priority

 

 

 

The priority of the selected interface.

 

 

 

 

 

 

 

MTU Ignore

 

 

 

Indicates whether Maximum Transmission Rate (MTU) detection is disabled

 

 

 

 

 

 

on the selected interface.

 

 

 

 

 

 

 

Database Filter

 

 

 

Indicates whether link-state advertisement (LSA) flooding is disabled on the

 

 

 

 

 

 

selected interface.

 

 

 

 

 

 

 

Hello Interval

 

 

 

The interval between hello packets (in seconds) sent over this interface.

 

 

 

 

 

 

 

Transmit Delay

 

 

 

The amount of time OSPF waits (in seconds) before flooding an LSA over

 

 

 

 

 

 

the link.

 

 

 

 

 

Retransmit Interval

 

The interval between LSA retransmissions (in seconds) over the selected

 

 

 

 

 

 

interface.

 

 

 

 

 

 

 

Dead Interval

 

 

 

The interval OSPF waits (in seconds) before declaring a neighboring router

 

 

 

 

 

 

dead because of an absence of hello packets.

 

 

 

 

 

 

 

Network Type

 

 

 

The network type configured for the selected interface, if it differs from the

 

 

 

 

 

 

default medium.

 

 

 

 

 

 

 

Add button

 

 

 

Opens the OSPF Interface Dialog Box, page K-238. From here you can

 

 

 

 

 

 

define the properties of an OSPF interface.

 

 

 

 

 

 

 

Edit button

 

 

 

Opens the OSPF Interface Dialog Box, page K-238. From here you can edit

 

 

 

 

 

 

the properties of the selected OSPF interface.

 

 

 

 

 

 

 

Delete button

 

 

 

Deletes the selected OSPF interface definitions from the table.

 

 

 

 

 

 

 

Save button

 

 

 

Saves your changes to the Security Manager server but keeps them private.

 

 

 

 

 

 

Note To publish your changes, click the Submit icon on the toolbar.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Tip

To choose which columns to display in the table, right-click a column header, then

 

 

 

 

 

select Show Columns. For more information about table display options, see

 

 

 

 

 

Table Columns and Column Heading Features, page 3-26.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User Guide for Cisco Security Manager 3.2

 

 

 

 

 

 

 

 

 

 

OL-16066-01

 

 

 

 

 

K-237

 

 

 

 

 

 

Page 237
Image 237
Cisco Systems OL-16066-01 appendix Table Columns and Column Heading Features, 237