Cisco Systems OL-16066-01 appendix PPP Dialog Box-MLP Tab, PPP Dialog Box-PPP Tab, page K-80, Mlp

Appendix K Router Platform User Interface Reference

PPP/MLP Policy Page

PPP Dialog Box—MLP Tab

	Use the MLP tab of the PPP dialog box to define Multilink PPP (MLP) parameters
	for the selected PPP connection.
	Navigation Path
	Go to the PPP Dialog Box, page K-78, then click the MLP tab.
	Related Topics
		• PPP Dialog Box—PPP Tab, page K-80
	Field Reference
Table K-36	PPP Dialog Box—MLP Tab
Element			Description
Enable Multilink PPP			When selected, MLP is enabled on this PPP connection.
(MLP)			When deselected, MLP is disabled.
Allow Multiple Data			When selected, enables multiple data classes on the MLP bundle.
Classes			Delay-sensitive traffic is placed into Class 1, where it can be interleaved but
			never fragmented. Normal data traffic is placed into Class 0, which is subject
			to fragmentation just as regular multilink packets are.
			When deselected, all traffic is subject to fragmentation.
Enable Interleaving of			When selected, enables the interleaving of packets among the fragments of
Packets Among			larger packets on the MLP bundle.
Fragments of Larger			Note If you enable interleaving without defining a fragment delay, the
Packets
			default delay of 30 seconds is configured. This value does not appear
			in Security Manager or in the device configuration.
			When deselected, interleaving is disabled.
			Note Serial interfaces do not support interleaving.

	User Guide for Cisco Security Manager 3.2
K-84	OL-16066-01