K-243
User Guide for Cisco Security Manager 3.2
OL-16066-01
AppendixK Router Platform User Interface Reference
OSPF Process Policy Page
OSPF Process Policy Page
OSPF is an interior gateway routing protocol that uses link states instead of
distance vectors for path selection. OSPF propagates link-state advertisements
(LSAs) instead of routing table updates, which enables OSPF networks to
converge quickly.
You can configure OSPF process policies from the following tabs on the OSPF
Process page:
OSPF Process Page—Setup Tab, pageK-243
OSPF Process Page—Area Tab, pageK-247
OSPF Process Page—Redistribution Tab, pageK-249
For more information, see OSPF Routing on Cisco IOS Routers, page 15-192.
Note For more information about OSPF interface policies, see OSPF Interface Policy
Page, page K-236.
Navigation Path
(Device view) Select Platform > Routing > OSPF Process from the Policy
selector.
(Policy view) Select Router Platform > Routing > OSPF Process from the
Policy Type selector. Right-click OSPF Process to create a policy, or select
an existing policy from the Shared Policy selector.
Related Topics
Chapter K, “Router Platform User Interface Reference”

OSPF Process Page—Setup Tab

Use the OSPF Process Setup tab to create, edit, and delete OSPF processes. This
includes selecting those interfaces that will remain passive, which means that they
will not send routing updates to their neighbors. You can create as many processes
for each router as required.