How to change the master PIN, New PIN is saved | Sony CD145 specs

5.5.10How to change the master PIN

The master PIN is a 4-digit PIN for handset registration and reset of your phone. Default master PIN is 0000.This PIN is also used to protect the settings of your handset.Your handset will prompt you whenever the PIN is required.

Note

The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1Press

2Press

3Enter the default / current 4-digit PIN code (0 to 9)

4Press

5Enter the new 4-digit PIN

6Press

7Enter the new 4-digit PIN

again to reconfirm

8

Press

to save the

settings.

•The new PIN is saved.

Note

If an incorrect PIN is entered, a

long beep is emitted and the phone will return to idle mode.

5.5.11 How to program voice mailbox number

Some network service providers offer voice mailbox services. Contact your network provider for more information about this feature.You can set your voice mailbox number in

directly.

1Press

2Press

3Enter the phone number of your network voice

mailbox

4 Press to save the settings

5.5.12How to access your voice mail number

1 Press and hold to dial out to your voice mailbox number.

26	Use more of your phone

Image 28

Sony CD145 manual How to change the master PIN, New PIN is saved, How to program voice mailbox number

Contents

CD145 EN Digital Cordless TelephonePage Table of contents Default settings Frequently asked questions How to change the remote PINAnswering machine Power requirements Easily accessible Use one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Using GAP standard compliance Electric, Magnetic and Electromagnetic Fields EMFPage What’s in the box Telephone handset Base stationLine cord Batteries Overview Phone Handset ACall Log key Phonebook keyTalk key Redial/Flash key Alphanumeric keypad GStar key HHash keyCall Transfer / Intercom / Conference Program key Display icons on the handset Delete key Base station Backward keyEvent LED Forward key + / key Getting started Connect the base Station Slide out the battery cover Place the batteries as Install rechargeable BatteriesConfigure your Phone Press Country setting tableAppear on the screen Tip Make a call Predialling Call is initiatedDirect dialling Call from the call Log Call from the phonebook Call from the redial listDisplay shows the last number dialled End a call How to make a second call During a call How to answer a Second callHow to use Intercom Recall How to make an Internal call Press on the called handsetCalled handset rings if it is available Conference call is initiated During the conference call How to find a handsetExternal call is put on hold automatically How to adjust earpiece volume During a call Call in progress Mute/Unmute microphone During a callIs shown on the display Number is saved Selected memory location How to access the phonebook Idle mode How to edit the phonebook entry or Delete a numberHow to delete the entire phonebook All the phonebook entries are deleted How to access the call log How to delete the entire call logHow to access the redial list Settings How to set the time 1 Press How to set the ring Volume How to setHow to activate/deactivate Keypad lock How to select recall Time How to select dial Mode Current settings are displayedHow to turn on/turn off the key Tone How to set the auto prefix How to change the master PIN How to program voice mailbox numberHow to access your voice mail number New PIN is saved How to restore to default settings Your phone is reset to its default settings How to set answer delay How to turn offHow to record your outgoing message How to play Outgoing message How to delete outgoing messageHow to select the default outgoing Message Country setting table on Section How to play Incoming messages How to remotely access your How to screen an incoming callPress and hold for two Seconds to delete all old messages New remote access PIN Is saved How to change the remote PINKeys Description Default settings Items Default values Connection Handset does not switch on Phone does not work at allCommunication is lost during a call Poor audio quality Appears Set-up Caller ID does not work properlyCall Waiting call cannot be answered Handset displays nothing, but only the is blinking Caller does not hear me Noise interference on your radio or televisionPhonebook entry cannot be stored Handset is unable to register Unable to perform remote operation