Call from the phonebook, Call from the redial list | Sony CD145

Note

The oldest entry will be deleted when the memory is full.

4.1.4Call from the phonebook

1 Press and the first number in the phonebook displays

The number stored in memory location 0 will be displayed if a number has been stored in this location before, otherwise, only memory location number 0- will be displayed.

2Press repeatedly until the desired phone number

displays

Tip

For numbers stored in location numbers 0 to 9, you can enter the phonebook location number directly to access your desired phone number. For numbers stored in memory locations 10 to 19, press repeatedly to access.

3 Press to dial the

selected number

•The call is initiated.

4.1.5Call from the redial list

1Press

•The display shows the last number dialled.

Note

The handset stores the last five numbers dialled.

2Press repeatedly to show the other last numbers dialled

3Press to dial the selected number

4.1.6Call timer The call timer shows the duration of your current call when you hang up your phone. It is shown in minutes and seconds format (MM-SS).

4.2Answer a call

When the phone rings, press .

•The call is initiated.

4.3End a call

Press during a call connection

•The call ends.

OR

Put the handset on to the base station

•The call ends.

Using your phone

17

Image 19

Sony CD145 manual Call from the phonebook, Call from the redial list, Display shows the last number dialled, End a call

Contents

EN Digital Cordless Telephone CD145Page Table of contents Default settings Frequently asked questions How to change the remote PINAnswering machine Easily accessible Power requirements Use one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard compliancePage Batteries What’s in the boxTelephone handset Base station Line cord Redial/Flash key Overview Phone Handset ACall Log keyPhonebook key Talk key Program key Alphanumeric keypad GStar keyHHash key Call Transfer / Intercom / Conference Display icons on the handset + / key Delete key Base stationBackward key Event LED Forward key Connect the base Station Getting started Slide out the battery cover Place the batteries as Install rechargeable BatteriesConfigure your Phone Press Country setting tableAppear on the screen Tip Call from the call Log Make a call PrediallingCall is initiated Direct dialling End a call Call from the phonebookCall from the redial list Display shows the last number dialled Recall How to make a second call During a callHow to answer a Second call How to use Intercom Conference call is initiated How to make an Internal callPress on the called handset Called handset rings if it is available During the conference call How to find a handsetExternal call is put on hold automatically Number is saved Selected memory location How to adjust earpiece volume During a callCall in progress Mute/Unmute microphone During a call Is shown on the display All the phonebook entries are deleted How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number How to delete the entire phonebook Settings How to set the time 1 Press How to access the call logHow to delete the entire call log How to access the redial list How to select recall Time How to set the ring VolumeHow to set How to activate/deactivate Keypad lock How to set the auto prefix How to select dial ModeCurrent settings are displayed How to turn on/turn off the key Tone New PIN is saved How to change the master PINHow to program voice mailbox number How to access your voice mail number Your phone is reset to its default settings How to restore to default settings How to set answer delay How to turn offHow to record your outgoing message Country setting table on Section How to play Outgoing messageHow to delete outgoing message How to select the default outgoing Message Incoming messages How to play How to remotely access your How to screen an incoming callPress and hold for two Seconds to delete all old messages New remote access PIN Is saved How to change the remote PINKeys Description Items Default values Default settings Poor audio quality Connection Handset does not switch onPhone does not work at all Communication is lost during a call Handset displays nothing, but only the is blinking AppearsSet-up Caller ID does not work properly Call Waiting call cannot be answered Handset is unable to register Caller does not hear meNoise interference on your radio or television Phonebook entry cannot be stored Unable to perform remote operation