Appears, Set-up Caller ID does not work properly | Sony CD145

•Charge the batteries for at least 24 hours

•Move closer to the base station

•Use the line cable provided

•Connect the line adaptor (when needed) to the line cord

The	is blinking.

•Move closer to the base station

•Check battery level

•Register the handset to the base station

The appears.

•Replace the batteries with new ones (use only rechargeable batteries)

Set-up

Caller ID does not work properly.

•Check with your local phone company that the CID service is subscribed to

•Let the phone ring at least once before answering

The Call Waiting call cannot be answered.

•Check with your local phone company and select the correct recall duration

The handset displays nothing, but only the is blinking.

•Try again by disconnecting and connecting the base station power supply and follow the procedure to register a handset (see Section 3.5)

•Remove and place back the handset batteries

Sound

Handset does not ring!

•Increase the volume

•Make sure that the adaptor and the phone cord are connected properly

•Move the handset closer to the base unit

•Make sure the handset ringer

is turned on ( is not displayed on the LCD)

Frequently asked questions

35

Image 37

Sony CD145 manual Appears, Set-up Caller ID does not work properly, Call Waiting call cannot be answered

Contents

EN Digital Cordless Telephone CD145Page Table of contents Default settings Frequently asked questions How to change the remote PINAnswering machine Easily accessible Power requirements Use one of the following disposal options National recovery & recycling systemDisposal instructions for batteries Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard compliancePage Telephone handset Base station What’s in the boxLine cord Batteries Phonebook key Overview Phone Handset ACall Log keyTalk key Redial/Flash key HHash key Alphanumeric keypad GStar keyCall Transfer / Intercom / Conference Program key Display icons on the handset Backward key Delete key Base stationEvent LED Forward key + / key Connect the base Station Getting started Slide out the battery cover Place the batteries as Install rechargeable BatteriesConfigure your Phone Press Country setting tableAppear on the screen Tip Call is initiated Make a call PrediallingDirect dialling Call from the call Log Call from the redial list Call from the phonebookDisplay shows the last number dialled End a call How to answer a Second call How to make a second call During a callHow to use Intercom Recall Press on the called handset How to make an Internal callCalled handset rings if it is available Conference call is initiated During the conference call How to find a handsetExternal call is put on hold automatically Call in progress Mute/Unmute microphone During a call How to adjust earpiece volume During a callIs shown on the display Number is saved Selected memory location How to edit the phonebook entry or Delete a number How to access the phonebook Idle modeHow to delete the entire phonebook All the phonebook entries are deleted How to delete the entire call log How to access the call logHow to access the redial list Settings How to set the time 1 Press How to set How to set the ring VolumeHow to activate/deactivate Keypad lock How to select recall Time Current settings are displayed How to select dial ModeHow to turn on/turn off the key Tone How to set the auto prefix How to program voice mailbox number How to change the master PINHow to access your voice mail number New PIN is saved Your phone is reset to its default settings How to restore to default settings How to set answer delay How to turn offHow to record your outgoing message How to delete outgoing message How to play Outgoing messageHow to select the default outgoing Message Country setting table on Section Incoming messages How to play How to remotely access your How to screen an incoming callPress and hold for two Seconds to delete all old messages New remote access PIN Is saved How to change the remote PINKeys Description Items Default values Default settings Phone does not work at all Connection Handset does not switch onCommunication is lost during a call Poor audio quality Set-up Caller ID does not work properly AppearsCall Waiting call cannot be answered Handset displays nothing, but only the is blinking Noise interference on your radio or television Caller does not hear mePhonebook entry cannot be stored Handset is unable to register Unable to perform remote operation