Note
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
3.2Install rechargeable
batteries
Your CD145 is supplied with two rechargeable batteries. Before using the handset, install the batteries into the handset and fully charged them up.
1Slide out the battery cover
2Place the batteries as
indicated in the battery compartment and replace the battery cover.
3.3Place the handset on
the charging cradle Charge the handset for at least 24 hours before using it for the first time.
When the battery is fully charged, the talk time of your CD145 is approximately 12 hours and the standby time is approximately 120 hours.
1Place the handset on the charging cradle of the base station.
2When the handset is fully
charged, | is displayed. |
3.4Configure your
phone
Before using your CD145, you need to configure it according to the country of use.
Depending on your country, country selection screen may not appear. In that case, you do not need to select the country code to configure your phone. After charging it for a few minutes, the country code selection screen appears. Follow these steps to configure your phone:
Getting started | 13 |
