Power requirements, Easily accessible | Sony CD145 manual

1 Important

Take time to read this user manual before you use your CD145. It contains important information and notes regarding your phone.

1.1Power requirements

• This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost.

• The Electrical network is classified as hazardous.The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always

easily accessible.

Warning

• Do not allow the charging contacts or the battery to come into contact with metal objects.

• Do not allow the charger to come into contact with liquids.

• Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

•Always use the cables provided with the product.

•Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.

•This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

1.2Conformity

We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.You can find the Declaration of Conformity on www.p4c.philips.com.

1.3Recycling and disposal

Disposal instructions for old products:

The WEEE directive (Waste Electrical and Electronic Equipment Directive; 2000/96/EC) has been put in

Important

3

Image 5

Sony CD145 manual Power requirements, Easily accessible

Contents

EN Digital Cordless Telephone CD145Page Table of contents Answering machine How to change the remote PINDefault settings Frequently asked questions Easily accessible Power requirements Disposal instructions for batteries National recovery & recycling systemUse one of the following disposal options Electric, Magnetic and Electromagnetic Fields EMF Using GAP standard compliancePage Telephone handset Base station What’s in the boxLine cord Batteries Phonebook key Overview Phone Handset ACall Log keyTalk key Redial/Flash key HHash key Alphanumeric keypad GStar keyCall Transfer / Intercom / Conference Program key Display icons on the handset Backward key Delete key Base stationEvent LED Forward key + / key Connect the base Station Getting started Configure your Phone Install rechargeable BatteriesSlide out the battery cover Place the batteries as Appear on the screen Country setting tablePress Tip Call is initiated Make a call PrediallingDirect dialling Call from the call Log Call from the redial list Call from the phonebookDisplay shows the last number dialled End a call How to answer a Second call How to make a second call During a callHow to use Intercom Recall Press on the called handset How to make an Internal callCalled handset rings if it is available Conference call is initiated External call is put on hold automatically How to find a handsetDuring the conference call Call in progress Mute/Unmute microphone During a call How to adjust earpiece volume During a callIs shown on the display Number is saved Selected memory location How to edit the phonebook entry or Delete a number How to access the phonebook Idle modeHow to delete the entire phonebook All the phonebook entries are deleted How to delete the entire call log How to access the call logHow to access the redial list Settings How to set the time 1 Press How to set How to set the ring VolumeHow to activate/deactivate Keypad lock How to select recall Time Current settings are displayed How to select dial ModeHow to turn on/turn off the key Tone How to set the auto prefix How to program voice mailbox number How to change the master PINHow to access your voice mail number New PIN is saved Your phone is reset to its default settings How to restore to default settings How to record your outgoing message How to turn offHow to set answer delay How to delete outgoing message How to play Outgoing messageHow to select the default outgoing Message Country setting table on Section Incoming messages How to play Press and hold for two Seconds to delete all old messages How to screen an incoming callHow to remotely access your Keys Description How to change the remote PINNew remote access PIN Is saved Items Default values Default settings Phone does not work at all Connection Handset does not switch onCommunication is lost during a call Poor audio quality Set-up Caller ID does not work properly AppearsCall Waiting call cannot be answered Handset displays nothing, but only the is blinking Noise interference on your radio or television Caller does not hear mePhonebook entry cannot be stored Handset is unable to register Unable to perform remote operation