Setting the Ring Pattern
Your telephone company will assign a distinctive ring pattern to each number when you order the DRPD service. Follow this procedure to set the fax ring pattern that matches the pattern assigned by the telephone company:
1 Make sure you have set the receive mode to <DRPD>. (See "Setting the Receive Mode," on p.
2 Press [Menu].
3 Press [
] or [
] to select <FAX SETTINGS> ➞ press [Set].
4 Press [
] or [
] to select <RX SETTINGS> ➞ press [Set].
5 Press [
] or [
] to select <DRPD:SELECT FAX> ➞ press [Set].
6 Press [
] or [
] to select a ring pattern ➞ press [Set].
Ex: | DRPD:SELECT FAX |
| ➞ | R X SET T I N G S |
| NORMAL | RI N G | 1 . DRPD : S E L E C T F A X | |
|
|
|
|
|
You can select from the following:
-<DOUBLE RING>: Two short rings at regular intervals
-<TRIPLE RING>: Three short rings at regular intervals
-<NORMAL RING>: Ring type of normal telephone line
7 Press [Stop/Reset] to return to the standby display.
5
Receiving Faxes
Setting the Receive Mode |
