Infiniti S51-D owner manual Language/Units settings, HOW to USE AUX Button, Display Mode

SAA1816

Language/Units settings

The Language/Units settings display will appear when pushing the SETTING button, selecting the “Language/Units” key* with the INFINITI controller and pushing the ENTER button.

*For models with the navigation system, select the “Others” key to show the Language/Units” key.

Select Language:

Choose the “Select Language” key and push the ENTER button. From the following display, select “English”, “Français” or “Español”* for your favorite display ap-

pearance.

*Only for models without navigation system.

Select Units:

Choose the “Select Units” key and push the ENTER button. From the following display, select “US” (Mile, 8F, MPG) or “Metric” (km, 8C, L/100 km) for your favorite display appearance.

Select Units (Tire Pressure):

Choose the “Select Units (Tire Pressure)” key and push the ENTER button. From the following display, select “kPa” or “psi”.

HOW TO USE AUX BUTTON

Images being played can be switched to the center display if NTSC compatible devices are connected to the auxiliary input jacks on the front side of the center console. (See “AUXILIARY INPUT JACKS” later in this section.)

Push the DISC·AUX (with navigation) AUX (without navigation) button to perform switching.

SAA1567

Display Mode

The above display will appear when the “Setting” key on the lower left side of the AUX display is selected using the INFINITI controller and pushing the ENTER button.

Choose the display mode from the follow- ing:

.Normal

.Wide

.Cinema

Monitor, climate, audio, phone and voice recognition systems 4-19