adjusting switch is operated when the seat is at the exit position.

Cancel or activate entry/exit func- tion

The selector lever must be in the P (Park) position with the ignition switch in the OFF position.

The entry/exit function can be activated or canceled by pressing and holding the SET switch for more than 10 seconds.

The indicator lights on the memory switches (1 and 2) will blink once when the function is canceled, and the indicator lights will blink twice when the function is activated. Note that the indicator lights may illuminate after 5 seconds while holding the SET switch. This indicates readiness for linking the Intelligent Key to a stored memory position. Keep the SET switch pressed for more than 10 seconds to turn on or off the entry/exit function.

The entry/exit function can also be acti- vated or canceled if the Lift Steering Wheel on Exitkey or Slide Driver Seat Back on Exitkey is turned to ON or OFF in the Comfort & Conv.settings. (See VEHICLE INFORMATION AND SETTINGSin the 4. Monitor, climate, audio, phone and voice recognition systemssection.)

Initialize entry/exit function

If the battery cable is disconnected, or if the fuse opens, the entry/exit function will not work though this function was set on before. In such a case, after connecting the battery or replacing with a new fuse, open and close the drivers door more than two times after the ignition switch is turned from the ON position to the LOCK position. The entry/exit function will be activated.

SPA2525

SEAT SYNCHRONIZATION FUNCTION

The seat synchronization function automa- tically adjusts the positions of the steering wheel and outside mirrors when the seat is adjusted using the power seat switches.

However, the steering wheel and outside mirrors will not move if the seat is adjusted over the maximum thresholds. The system considers that the steering wheel and outside mirror adjustments are not neces- sary because the seat may not be adjusted for the driving position. Note that the function is set to disabled as the factory default setting.

The seat synchronization function operates

Pre-driving checks and adjustments 3-25

Page 163
Image 163
Infiniti S51-D owner manual Cancel or activate entry/exit func- tion, Initialize entry/exit function