Infiniti S51-D owner manual 24Safety Seats, seat belts and supplemental restraint system

not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint.

SSS0646

Front facing — step 2

2.Secure the child restraint anchor at- tachments to the LATCH lower anchors. Check to make sure the LATCH attach- ment is properly attached to the lower anchors.

3.The back of the child restraint should be secured against the vehicle seat- back. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. (See “HEAD RE- STRAINT” earlier in this section.)

If the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. If the seating position does

1-24Safety — Seats, seat belts and supplemental restraint system

SSS0647

Front facing — step 4

4.For child restraints that are equipped with webbing mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center of the child restraint with your knee to com- press the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.

5.If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point. (See “TOP TETHER STRAP CHILD RESTRAINT” earlier in this section.)