Black plate (389,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SCE0771
Jack-uppoint
1. Placethe jack directly under the jack-up
point as illustrated so the top of the
jackcontacts the vehicle at the jack-up
point. Align the jack head between the
two notches in the front or the rear as
shown. Also fit the groove of the jack
head between the notches as shown.
The jack should be used on level firm
ground.
SCE0504
2. Looseneach wheel nut one or two turns
by turning counterclockwise with the
wheel nut wrench. Do not remove the
wheel nuts until the tire is off the
ground.
3. Carefully raise the vehicle until the tire
clears the ground. To lift the vehicle,
securely hold the jack lever and rod
with both hands as shown above.
Remove the wheel nuts, and then
remove the tire.
In case of emergency 6-5