Infiniti S51-D owner manual Front-facing, Front facing front passenger seat step

SSS0640

Front facing (front passenger seat) — step 1

Front-facing

Follow these steps to install a front-facing child restraint using the vehicle seat belt in the rear seat or in the front passenger seat:

1.If you must install a child restraint in the front seat, it should be placed in a front-facing direction only. Move the seat to the rearmost position. Child restraints for infants must be used in the rear-facing direction and therefore must not be used in the front seat.

2.Position the child restraint on the seat. Always follow the child restraint man- ufacturer’s instructions.

The back of the child restraint should be secured against the vehicle seat- back. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. (See “HEAD RE- STRAINT” earlier in this section.)

If the head restraint is removed, store it in a secure place. Be sure to install the head restraint when the child restraint is removed. If the seating position does not have an adjustable head restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint.

SSS0360B

Front facing — step 3

3.Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s instructions for belt routing.

1-28Safety — Seats, seat belts and supplemental restraint system