Infiniti S51-D owner manual Compact Disc CD player/changer operation

.ANTENNA ERROR (Antenna connection error)

.LOADING (When the initial setting is performed)

.UPDATING (When the satellite radio subscription is not active)

.INVALID CH (Invalid station is received.)

SCAN tuning:

*1 to *6 Station memory operations:

Six stations can be set for PRESET A, B and C. The PRESET A, B and C function allows you to store a combination of FM, AM and XM stations for easy access.

1.Choose preset station A, B or C using the preset select button.

2.Tune to the desired station using the SEEK, SCAN or TUNE button.

information will be displayed on the screen.

.CH Name

.Category

.Name

.Title

.Other

Push the SCAN tuning button to tune from low to high frequencies and stops at each broadcasting station for 5 seconds. Push- ing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station.

If the SCAN tuning button is not pushed within 5 seconds, SCAN tuning moves to the next station.

PRESET select:

Push the PRESET select button to go to the next PRESET. After choosing from the PRESET A, B or C, you can select the desired station using the INFINITI controller or pushing the station preset buttons *1 to *6 .

3.Select the desired station and keep

pushing any of the desired station preset buttons *1 to *6 until a beep sound is heard. (The radio mutes when the select button is pushed.)

4.The station indicator will then illumi- nate and the sound will resume. Memorizing is now complete.

5.Other buttons can be set in the same manner.

If the battery cable is disconnected, or if the fuse blows, the radio memory will be erased. In that case, reset the desired stations.

Text:

When the “Text” key is selected with the INFINITI controller on the display and then the ENTER button is pushed while the satellite radio is being played, the text

Compact Disc (CD) player/changer operation

Push the ignition switch to the ACC or ON position, push the LOAD button (if so equipped) and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing.

After loading the disc, the number of tracks on the disc and the play time will appear on the display.

If the radio is already operating, it will automatically turn off and the compact disc will play.

If the system has been turned off while the compact disc was playing, pushing the ON·OFF/VOL control knob will start the compact disc.

Monitor, climate, audio, phone and voice recognition systems 4-55