Infiniti S51-D owner manual Instrument brightness control, Turn Signal Switch *1 Turn signal

SIC3830

Instrument brightness control

The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjust- ment mode.

Push the upper switch *A to brighten the instrument panel lights. The bar *1 moves to the + side. When reaching the maximum brightness, “MAX” appears on the display

*2 .

Push the lower switch *B to dim the instrument panel lights. The bar *1 moves to the − side. When reaching the minimum

brightness, “MIN” appears on the display *3 . However, “MIN” does not appear during the nighttime.

The dot matrix liquid crystal display returns to the normal display under the following conditions:

.when the instrument brightness control switch is not operated for more than 5 seconds.

.when the or switch on the right side of the combination meter panel is pushed.

SIC3271

TURN SIGNAL SWITCH *1 Turn signal

Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automati- cally.

*2 Lane change signal

To indicate a lane change, move the lever up or down to the point where lights begin flashing.

Instruments and controls 2-41