Black plate (47,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SSS0100
Rear-facing
Follow these steps to install a rear-facing
childrestraint using the vehicle seat belt in
the rear seat:
1. Child restraints for infants must be
used in the rear-facing direction and
thereforemust not be used in thefront
seat. Position the childrestraint on the
seat. Always follow the restraint man-
ufacturers instructions.
SSS0654
Rearfacing step 2
2. Route the seat belt tongue through the
child restraint and insert it into the
buckleuntil you hear and feel the latch
engage. Be sure to follow the child
restraint manufacturers instructions
for belt routing.
SSS0655
Rearfacing step 3
3. Pull the shoulder belt until the belt is
fully extended. At this time, the seat
belt retractor is in the Automatic Lock-
ingRetractor (ALR) mode (child restraint
mode). It reverts to Emergency Locking
Retractor(ELR) mode when the seat belt
is fully retracted.
Safety Seats, seat belts and supplemental restraint system 1-31