Infiniti S51-D Voice recognition settings, Using the System, Initialization, Before Starting

SAA2166

Voice recognition settings

The available settings of the INFINITI Voice Recognition system are described.

1.Highlight “Voice Recognition Settings” and push the ENTER button.

2.You can confirm the page by scrolling the screen using the INFINITI controller.

USING THE SYSTEM

Initialization

When the ignition switch is pushed to the ON position, INFINITI Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to

accept voice commands. If the TALK switch is pushed before the initialization completes, the display will show the message: “Phonetic data downloaded. Please wait.” or a beep sounds.

BEFORE STARTING

To get the best recognition performance from INFINITI Voice Recognition, observe the following:

.The interior of the vehicle should be as quiet as possible. Close the windows to eliminate the surrounding noises (traf- fic noise and vibration sounds, etc.), which may prevent the system from correctly recognizing the voice com- mands.

.Wait until the tone sounds before speaking a command.

.Speak in a natural conversational voice without pausing between words.

.If the air conditioner is set to “Auto”, the fan speed is automatically lowered so that your commands can be recog- nized more easily.

SAA2167

GIVING VOICE COMMANDS

1.Push the TALK switch located on the steering wheel.

4-114Monitor, climate, audio, phone and voice recognition systems