Infiniti S51-D INDICATORS FOR OPERATION 1. Engine start operation indicator, 2. Steering lock release malfunc- tion indicator, 3. Intelligent Key insertion indicator, 4. Intelligent Key removal indicator, 5. NO KEY warning, 6. SHIFT Pwarning, 7. PUSHwarning

Black plate (92,1)
Model "S51-D" EDITED: 2008/ 3/ 26
INDICATORS FOR OPERATION
1. Engine start operation indicator
This indicator appears when the selector
lever is in the P (Park) position.
This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed.
2. Steering lock release malfunc-
tion indicator
This indicator appears when the steering
wheel cannot be released from the LOCK
position.
If this indicator appears, push the push-
button ignition switch while lightly turning
the steering wheel right and left.
3. Intelligent Key insertion indicator
Thisindicator appears when the Intelligent
Key needs to be inserted into the Intelli-
gent Key port. (For example, the Intelligent
Key battery is discharged.)
If this indicator appears, insert the Intelli-
gentKey into the Intelligent Keyport in the
correct direction. (See “PUSH-BUTTON
IGNITION SWITCH”in the “5. Starting and
driving”section.)
4. Intelligent Key removal indicator
This indicator appears when the driver’s
door is opened with the ignition switch in
the ACC, OFF or LOCK position and the
IntelligentKey placed in the Intelligent Key
port. A key reminder chime also sounds.
If this indicator appears, remove the
IntelligentKey from the Intelligent Keyport
and take it with you when leaving the
vehicle.
5. NO KEY warning
This warning appears in either of the
following conditions.
No key inside the vehicle:
The warning appears when the door is
closed with the Intelligent Key left outside
the vehicle and the ignition switch in the
ACC or ON position. Make sure that the
Intelligent Key is inside the vehicle.
Unregistered Intelligent Key:
The warning appears when the ignition
switch is pushed from the LOCK position
and the Intelligent Key cannot be recog-
nized by the system. You cannot start the
engine with an unregistered key. Use the
registered Intelligent Key.
See “INTELLIGENT KEY SYSTEM”in the “3.
Pre-driving checks and adjustments”sec-
tion for more details.
6. SHIFT “P”warning
This warning appears when the ignition
switch is pushed to stop the engine with
the selector lever in any position except
the P (Park) position.
If this warning appears, move the selector
lever to the P (Park) position or push the
ignition switch to the ON position.
An inside warning chime will also sound.
(See “INTELLIGENT KEY SYSTEM”in the “3.
Pre-driving checks and adjustments”sec-
tion.)
7. “PUSH”warning
This warning appears when the selector
leveris moved to the P (Park) positionwith
theignition switch in the ACC position after
the SHIFT “P”warning appears.
To push the ignition switch to the OFF
position, perform the following procedure:
SHIFT “P”warning ?(Move the
selector lever to “P”)?PUSH warning
?(Push the ignition switch ?ignition
switch position is turned to ON) ?
PUSH warning ?(Push the ignition
switch ?ignition switch position is
turned to OFF)
2-24 Instrumentsand controls