Black plate (326,1)
Model "S51-D" EDITED: 2008/ 3/ 26
in the direction of the signal. (The LDP
system will be deactivated for approxi-
mately2 secondsafter the lane change
signal is turned off.)
.When the vehicle speed lowers to less
than approximately45 MPH ( 72 km/h).
After the above conditions have finished
andthe necessary operating conditions are
satisfied, the warning and assist functions
will resume.
Condition B:
Theassist function of the LDP system is not
designed to work under the following
conditions (warning is still functional):
.When the brake pedal is depressed.
.When the steering wheel is turned as
far as necessary for the vehicle to
change lanes.
.When the accelerator pedal is de-
pressed while the brake control assist
is provided.
.When the Intelligent Cruise Control
(ICC) approachwarning occurs.
.When the hazard warning flashers are
operated.
.Whendriving ona curve at high speed.
After the above conditions have finished
andthe necessary operating conditions are
satisfied, the LDP brake control assist
function will resume.
Condition C:
Underthe followingconditions, a beep will
soundand the LDP system will be canceled
automatically. The LDP ON indicator light
will blink in green, and the LDP system
cannot be activated:
.When the VDC system (except TCS
function) or ABS operates.
.When the VDC system is turned off.
.Whenthe SNOWmode switch is turned
on.
Action to take:
Whenthe above conditions no longer exist,
turnoff the LDP system by pushing the LDP
switch. Push the LDP switch again to turn
the LDP system back on.
Temporarydisabled status at high tem-
perature:
If the vehicle is parked in direct sunlight
under high temperature conditions (over
approximately 1048F (408C)) and then the
LDP system is turned on, the LDP system
may be deactivated automatically. The LDP
ON indicator (green) will blink.
When the interior temperature is reduced,
the system will resume operating automa-
tically and the LDP ON indicator will stop
blinking.
5-24 Starting and driving