Black plate (296,1)
Model "S51-D" EDITED: 2008/ 3/ 26
SAA1932
2. A list of commands appears on the
screen, and the system announces,
“Please say a command”.
3. After the tone sounds and the icon on
the screen changes from to ,
speak a command.
Operating tips
.Voice commands cannot be accepted
when the icon is .
.The list displayed can be scrolled by
tiltingthe ENTERswitch on the steering
wheel.
.If the command is not recognized, the
systemannounces, “Please say again”.
Repeat the command in a clear voice.
.Pushthe BACK button once to returnto
the previous screen.
.If you want to cancel the command,
push and hold the TALK switch for
1 second. The message “Voice can-
celed”will be announced.
.Push the TALK switch again to
pause the operation. Push the TALK
switch to restart the operation.
.If you want to adjust the volume of the
system feedback, push the volume
controlbuttons (+ or−) on the steering
wheel or use the audio system volume
knob while the system is making an
announcement.
How to speak numbers
INFINITI Voice Recognition requires a cer-
tain way to speak numbers when giving
voice commands. Refer to the following
examples.
General rule:
Onlysingle digits 0 (zero) to 9 can be used.
(For example, if you would like to say 500,
“five zero zero”can be used, but “five
hundred”cannot.)
Phone numbers:
Speak phone numbers according to the
following examples:
.1-800-662-6200
—“Dial one eight zero zero six six two
six two zero zero.”
Note 1: For the best voice recognition
phone dialing results, say phone numbers
as single digits.
Note 2: You cannot say 555-6000 as “five
five five six thousands”.
Note 3: When speaking a house number,
speak the number “0”as “zero”. If the
letter “o (Oh)”is included in the house
number, it will not be recognized as the
number “0 (zero)”even if you speak “oh”
instead of “zero”.You can only say “zero”
for “0 (Zero)”.You can sayeither “zero”or
“oh”for “o (Oh)”.
4-130 Monitor, climate,audio, phone and voice recognition systems