Infiniti S51-D owner manual Child Restraint Installation, Using the Seat Belts

5.Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 3 through 4.

		However, if you must install a forward
		facing child restraint in the front pas-
		senger seat, move the passenger seat to
		the rearmost position. Also, be sure the
		front passenger air bag status light is
		illuminated to indicate the passenger air
		bag is OFF. See “Front passenger air bag
		and status light” later in this section for
		details.
	. The three-point seat belt in your vehicle
		is equipped with an Automatic Locking
		Retractor (ALR) mode which must be
SSS0100		used when installing a child restraint.
	.	Failure to use the ALR mode will result in
CHILD RESTRAINT INSTALLATION
		the child restraint not being properly
USING THE SEAT BELTS		secured. The restraint could tip over or
		otherwise be unsecured and cause
WARNING		injury to the child in a sudden stop or
		collision.
. Even with the INFINITI Advanced Air Bag	. A child restraint with a top tether strap
System, never install a rear-facing child		should not be used in the front passen-
restraint in the front passenger seat.		ger seat.
Front air bags inflate with great force. A
	The instructions in this section apply to
rear-facing child restraint could be
struck by the front air bag in a crash	child restraint installation using the vehicle
and could seriously injure or kill your	seat	belts in the rear seat or the front
	passenger seat.
child.

.INFINITI recommends that child re- straints be installed in the rear seat.

Safety — Seats, seat belts and supplemental restraint system 1-27