Infiniti S51-D owner manual Programming HomeLink, Cargo Light

CARGO LIGHT HomeLink® UNIVERSAL TRANSCEIVER

SIC2925

When the switch is in the DOOR position *A , the light illuminates while the lift gate is opened. When the lift gate is closed, the light will turn off.

When the switch is in the OFF position *B , the light will turn off.

The light will turn off after 30 minutes when the lights remain illuminated to prevent the battery from becoming dis- charged.

HomeLink® Universal Transceiver provides a convenient way to consolidate the func- tions of up to three individual hand-held transmitters into one built-in device.

HomeLink® Universal Transceiver:

.Will operate most Radio Frequency (RF) devices such as garage doors, gates, home and office lighting, entry door locks and security systems.

.Is powered by your vehicle’s battery. No separate batteries are required. If the vehicle’s battery is discharged or is disconnected, HomeLink® will retain all programming.

Once HomeLink® Universal Transceiver is programmed, retain the original transmit- ter for future programming procedures (Example: new vehicle purchases). Upon sale of the vehicle, the programmed HomeLink® Universal Transceiver buttons should be erased for security purposes. For additional information, see “PRO- GRAMMING HomeLink®” later in this sec- tion.

WARNING

.Do not use HomeLink® Universal Trans- ceiver with any garage door opener that lacks safety stop and reverse features as

required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982.) A garage door opener which cannot detect an object in the path of a closing garage door and then automati- cally stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death.

.During programming procedure, your garage door or security gate may open or close. Make sure that people and objects are clear of the garage door, gate, etc. that you are programming.

.Your vehicle’s engine should be turned off while programming HomeLink® Uni- versal Transceiver.

PROGRAMMING HomeLink®

To program your HomeLink® Transceiver to operate a garage door, gate, or entry door opener, home or office lighting, you need to be at the same location as the device. Note: Garage door openers (manufactured after 1996) have “rolling code protection”. To program a garage door opener equipped with “rolling code protection”; you will

Instruments and controls 2-65