Black plate (272,1)
Model "S51-D" EDITED: 2008/ 3/ 26
Speak the information you wish to record
clearly.When you aredone, pressthe
or button on the steering wheel.
A tone sounds and the system announces
“Memo recorded.”Another tone sounds to
end the VR session.
If the memo pad is full, the system asks if
you wish to record over the oldest memo.
“Delete”
The Delete command erases all memos.
Thesystem asksyou to confirm this action
before deleting all memos.
SAA1930
SETUP
Usethe Setup command to change options
associated with the Bluetooth
®
Hands-Free
Phone System.
“Pair Phone”
Use the Pair Phone command to pair a
phoneto the Bluetooth
®
Hands-FreePhone
System.
Whenyou are asked to enter a PIN code for
pairing your Bluetooth
®
cellular phone,
operate it to enter the code “1234”.
The code is always “1234”regardless of
the number of phones paired.
Up to 5 phones can be paired. If you try to
pair a sixth phone, the system announces
that you must first delete one phone or
replace an existing phone.
If you try to pair a phone that has already
been paired to your vehicle���s system, the
system announces the name the phone is
already using. The pairing procedure will
then be canceled.
When prompted by the system, choose
from the following commands:
.“New phone”—see “PAIRING PROCE-
DURE”earlier in this section.
.“Replace phone”—the system an-
nounces the names of the phones
already paired and asks which you
would like to replace.
Once you say the name of the phone
you wish to replace, the paring proce-
dure will begin. (See “PAIRING PROCE-
DURE”earlier in this section.)
.“List phone”—see the description
below.
“List Phones”
Use the List Phone command to hear the
namesof the phones currently paired. If no
phones are paired, the system announces,
“No paired phones to list.”The system
4-106 Monitor, climate,audio, phone and voice recognition systems